HP125 Series Multi-Sense Humidity Probe

The HP125 Multi-Sense Humidity Probe is a cost effective, easy to use solution to many industrial and laboratory measurement and control applications. The HP125 probe exploits the latest advancements in polymer humidity sensing technology and compact electronic circuitry. It is designed to continuously measure up to 4 measurement parameters using a single intelligent sensor tip including RH%, calculated Dew Point, …

Features

  • Replaceable Smart Sensor Tip
  • Analog Voltage Output (0-10VDC) for each measured parameter
  • RS-232 Serial Interface for reporting function
  • Replaceable Sintered Filter Element protects the sensor
  • 24VDC Power Input

ELH Series – Precision Humidity Chambers

The Edgetech Instruments Model ELH Series is a series of precision humidity chambers, with NIST traceable accuracies in humidity (±0.5% typical), temperature (±0.1°C) and dew point (±0.2°C). The ELH Series consist of a programmable controller for constant precision control and uniformity, and an integrated DewMaster chilled mirror hygrometer for accurate temperature and humidity measurements. The ELH series offers three standard …

Features

  • Precise chamber controls
  • Hygrometer utilizes primary measurement techniques
  • Historically proven and unsurpassed humidity control system
  • Sensing system discriminates between dew and contaminants
  • Programmable controller for automatic ramping, soaking and alarming
  • Stainless steel interior
  • Fully adjustable shelf
  • Demineralizing cartridge system
  • 2 inch access port
  • Drain: hard piped

AcuTrak 1000

The Edgetech Instruments’ AcuTrak 1000 is a digital display analyzer used primarily with Edgetech Instruments’ process moisture transmitters. The AcuTrak 1000 combines 4 to 20 mA input signal capability with a 24 Volt dc power supply, making it compatible with not only Edgetech Instruments moisture transmitters but most loop powered process transmitters. It is even more powerful when it is …

Features

  • Large 5-digit display
  • Four-button membrane keypad
  • 24 Vdc output power supply for connected device
  • Panel mounting (DIN 43700)
  • Ideal for 2-wire loop powered transmitters
  • Two user-programmable alarm relays with front panel LED indicators
  • Fully-controllable linear selectable 0 to 20 mA or 4 to 20 mA output for signal retransmission
  • NEMA 3 (IP54) front panel protection
  • RS485 port for digital output
  • Ac or Dc powered models available

CAM Compressed Air Module

The CAM (Compressed Air Module) is a sampling chamber for use with Edgetech Instruments’ humidity probes. The unique design provides for two modes of operation:  Direct connection to a pressurized process gas take-off point Use as a calibration flow through head. The most important design feature of the CAM is the heavy duty sample input ball valve. The CAM gives …

Features

  • Sample Chamber provides process penetration point for HP125 and 6742/44 probes
  • Allows safe service of probe at a pressurized process point
  • Provides valve inlet to isolate probe from process pressure
  • Provides “Bleeder Valve” to meter a small flow of sample past the probe sensing area
  • For Pressure DewPoint or Atmospheric DewPoint Measurements