Sentry Compressed Air Monitoring and Alarm System Data Sheet

SENTRY Compressed Air Monitor and Alarm

The Edgetech Instruments SENTRY turn-key measurement and alarm system features a smart multi-sense probe that continuously monitors the dew/frost point and pressure of compressed air systems to detect compressor or dryer failures and system pressure leaks. The SENTRY features a strobe lamp and pulsing horn plus an alarm relay contact that activate when a programmable, low pressure or high dew/frost …

Features

  • Detects upset conditions in compressed air systems
  • Constantly monitors pressure and dew/frost point temperature
  • Strobe lamp and pulsing audible alarms for low pressure or high dew/frost point alert
  • Displays dew/frost point and pressure on panel meter
  • NIST traceable calibration certificate
  • Field replaceable Smart Sensor Tip
  • Alarm relay and 4 to 20 mA outputs
  • Complete system, ready for installation

Sales Representative

You are required to login to view this page.

Home

The Earth Is Abundant with Water Vapor and Oxygen Measure It With Edgetech Instruments Chilled Mirror Hygrometers Dewpoint Transmitters Calibration & Service Oxygen Analyzers Chilled Mirror HygrometersMoisture TransmittersCalibration & ServiceOxygen AnalyzersThe Earth Is Abundant with Water Vapor and OxygenMeasure It With Edgetech InstrumentsEdgetech Instruments is a Global Leader In Moisture and Oxygen Measurement in GasesEdgetech Instruments is a world-class company …

HP125 Series Multi-Sense Humidity Probe

The HP125 Multi-Sense Humidity Probe is a cost effective, easy to use solution to many industrial and laboratory measurement and control applications. The HP125 probe exploits the latest advancements in polymer humidity sensing technology and compact electronic circuitry. It is designed to continuously measure up to 4 measurement parameters using a single intelligent sensor tip including RH%, calculated Dewpoint, Temperature …

Features

  • Single, cost-effective probe continuously measures up to 4 parameters including relative humidity, dewpoint, temperature and pressure
  • The sensor can be replaced in seconds and automatically synchronizes with the HP125 probe
  • Can be used stand-alone or in combination with the HP125-DCM or with the SENTRY series of compressed gas alarm modules
  • No need to send the probe for calibration service off-site
  • Each new sensor comes with a NIST traceable calibration certificate
  • For industrial and laboratory measurement and control applications