Products. Services. Solutions.
Categories
Applications
- All Products
- Aeronautics
- Air Make-up for Clean Rooms and Data Centers
- Air Separators
- Atmospheric Sciences
- Automotive
- Biologics and Cell Culture
- Checking Accuracy of Polymer and Metal Oxide Probes
- Compressed Air
- Critical Purged Atmospheres
- Dryer Efficiency
- Dynamometers
- Educational Institutions
- Engine Air Intake and Exhaust Testing
- Engine Test Cells
- Environmental Chambers
- Fluidized Bed Driers
- Food and Beverage
- Food Storage and Packaging
- Furnace
- General Purpose
- Glove Box Environments
- Government Agencies
- High Accuracy
- High Purity Welding
- HVAC
- Medical Gas
- Medical Packaging
- Metrology
- NIST Tracible Measurement in Metrology and Calibration Labs
- Pharmaceuticals
- Plastics
- Power and Energy
- Purified Gases
- R&D Test & Measurement
- Scientific Study
- Semiconductor
- Vacuum Systems
- Wind Tunnels
Overview
DewTech 390 Low Dewpoint Hygrometer
- A precision laboratory grade hygrometer system that measures an extremely wide range of dew/frost points in gases from as low as –90°C frost point to as high as +20°C dew point
- Based in the primary method chilled mirror technique with all the attributes, features and certifications needed for laboratory use at an affordable price
- Ideal for metrology labs, scientific research and process measurements or any application where high precision measurement of dew/frost point over a wide range with fast response and high stability are required
SENTRY Compressed Air Monitor and Alarm
- Detects upset conditions in compressed air systems
- Constantly monitors pressure and dew/frost point temperature
- Strobe lamp and pulsing audible alarms for low pressure or high dew/frost point alert
PPM1 Trace Moisture Analyzer
- Trace moisture transmitter for monitoring moisture levels in dew/frost point and ppmv
- Wide measurement range of 0.1 to 1250 ppmv covers many industrial and research applications
- Fundamental measurement principle traceable to NIST standards
HP125 Series Multi-Sense Humidity Probe
- Single, cost-effective probe continuously measures up to 4 parameters including relative humidity, dewpoint, temperature and pressure
- The sensor can be replaced in seconds and automatically synchronizes with the HP125 probe
- Can be used stand-alone or in combination with the HP125-DCM or with the SENTRY series of compressed gas alarm modules
PPM2 Portable Trace Moisture Transmitter
- Portable trace moisture analyzer for monitoring moisture levels in dew/frost point and ppm
- Wide measurement range of 0.1 to 1250 ppmv covers many industrial and research applications
- Fundamental measurement principle traceable to NIST standards
ELH Series – Precision Humidity Chambers
- A group of precision calibration chambers incorporating programmable controllers plus primary method DewMaster chilled mirror hygrometers
- Highly accurate temperature and humidity control similar in performance to two-pressure method devices but at a significantly lower price
- Delivered with multi-point, NIST traceable, ISO/IEC 17025 accredited certification
DPM-99 Dewpoint Monitor
- Drift free alternative medical air dew/frost point monitoring and alarm system encompassing a chilled mirror hygrometer plus audible and visible alarm functions, contained in a NEMA-12 enclosure
- Uses a primary method chilled mirror dew/frost point sensor to meet Level 1 and Level 2 requirements of NFPA 99 for Medical Air
- Certified in an ISO/IEC 17025 accredited laboratory traceable to NIST Standards
OxyTrans-PSS Portable Oxygen Transmitter
- A complete portable oxygen measurement sampling system based on the OxyTrans transmitter
- Easy to use, accurate and economical way to remotely measure oxygen in gases at trace and percent levels
- AC or battery powered for convenience
